1/2" BSP Stainless Steel Hose Tail Adaptor for 6 Litre - 27 Litre Ultrasonic Tanks

Part No
US-SP-DR-0.5
In stock
Allendale Ultrasonics
£6.48 £5.40
Overview
1/2" BSP Stainless Steel Hose Tail Adaptor for 6L - 27L Ultrasonic Tanks
  • Quality Stainless Steel Hose Tail Adaptor, quickly add your own flexible drain pipe
  • Suitable for use with 6-27L Ultrasonic Tanks
  • Standard 1/2" BSP fitting

 

 

1/2 BSP Stainless Steel Hose Tail Adaptor for 6L - 27L Ultrasonic Tanks

We strongly advise that this part is only intended for use on the advertised model and should not be used to repair any other item branded by a different manufacturer. Although the parts may look the same, the technical specifications may vary. Using parts that are incompatible can cause injury or serious damage to the part being replaced. We reserve the right to void any warranty where this part is not used in its intended circumstance.

 

 

Brand Information

Allendale ultrasonics, part of the Allendale group, has been supplying ultrasonic cleaners to Hobby users through to the industrial sectors since 2003, with a large range of stock tanks from 0.7 Litre to 288 Litres capacity, available off the shelf. Custom sizes within and beyond the stocked range are also available built to the customers desired specification.  

More Information
Weight(g)39.000000
TypeSpares
BrandAllendale Ultrasonics
GTIN5055396157284
Conditionnew
MPNUS-SP-DR-0.5
Write Your Own Review
You're reviewing:1/2" BSP Stainless Steel Hose Tail Adaptor for 6 Litre - 27 Litre Ultrasonic Tanks
Your Rating
Customer Questions
Hi AU, What would be the inner diameter for the hose that fits the Hose Tail Adaptor Thanks
The internal hose diameter is approximately 13.5mm, garden hose is usually suitable. Many thanks 
Did you find what you were looking for?